Free Shipping Coupon Now Available on Most Orders Over $25! Coupon applicable for use within the USA including Alaska and Hawaii. Please use coupon code FREESHIP when checking out. EXCLUSIONS: 500 foot and 1000 foot rolls of wire; flammable and/or hazardous chemicals; and any order in excess of 15 pounds combined weight. Coupon also DOES NOT apply to: International orders, oversize, truck or expedited shipping charges. Void where prohibited by law.
Part #
Description
Photo
Price
Add To Cart
D47-B15A-05W3
24 VOLTS DC 2950 RPM MUFFIN FAN (BALL BEARING)-108 CFM @ 42 dB-CURRENT RATING: .40 AMPS-SIZE: 4-3/4" (120mm) SQUARE x 1-1/2" DEEP-WITH WIRE LEADS
$39.95
*
*********************SERVO & STEPPER DC MOTORS*********************
*
LS-0003
4.0 to 5 VOLTS DC ANALOG SERVO MOTOR WITH PLASTIC GEARS-90 DEGREES (45 DEGREES LEFT AND 45 DEGREES RIGHT)-SIZE: 3/4"WIDE x 1/4"THICK x 3/4"HIGH RECTANGULAR HOUSING WITH MOUNTING HOLES SPACED 7/8" APART-INCLUDES 5" OF WIRE AND A 3 CONTACT PLUG
$17.95
LS-0006
4.0 to 6 VOLTS DC ANALOG SERVO MOTOR WITH PLASTIC GEARS-90 DEGREES (45 DEGREES LEFT AND 45 DEGREES RIGHT)-SIZE: 7/8"WIDE x 3/8"THICK x 7/8"HIGH RECTANGULAR HOUSING WITH MOUNTING HOLES SPACED 1" APART-INCLUDES 5" OF WIRE AND A 3 CONTACT PLUG
$19.75
LS-3006
5.0 to 6 VOLTS DC ANALOG SERVO MOTOR WITH PLASTIC GEARS-360 DEGREES (180 DEGREES LEFT AND 180 DEGREES RIGHT) FREEDOM OF MOVEMENT-SIZE: 1-9/16"WIDE x 11/16"THICK x 1-7/16"HIGH RECTANGULAR HOUSING WITH MOUNTING HOLES SPACED 1-7/8" APART-INCLUDES 5" OF WIRE
$27.50
MOTS2
12 VOLTS DC @ 60 milliamps STEPPER MOTOR-7.5 DEGREES PER STEP ANGLE WITH 48 STEPS-SIZE: 1-3/8" DIAMETER x 5/8" HIGH-INCLUDES A 5" LENGTH OF 6 CONDUCTOR WIRE TERMINATED WITH A 6 CONTACT CONNECTOR (.1" SPACING)
$24.75
*
******************TIMER & MISCELLANEOUS DC MOTORS*****************
*
MOT1
1.5 to 3 VOLTS DC 1500 to 3000 RPM MOTOR-SIZE: 1" DIAMETER WITH SOLDER TERMINATIONS & 1/16" SHAFT-CURRENT REQUIREMENT: 125 milliamps @ 2.5 VOLTS DC
$4.75
MOT-1
1.5 to 6 VOLTS DC 1000 to 5000 RPM MOTOR-SIZE: 1" DIAMETER WITH SOLDER TERMINATIONS & 1/16" SHAFT-CURRENT REQUIREMENT: 100 milliamps @ 6.9 VOLTS DC
$5.50
MOT-2
1.5 to 6 VOLTS DC 1500 to 7000 RPM MOTOR-SIZE: 1" DIAMETER WITH SOLDER TERMINATIONS & 1/16" SHAFT-CURRENT REQUIREMENT: 200 milliamps @ 6.9 VOLTS DC
$6.75
MOT2N
3 to 6 VOLTS DC 1500 to 14,400 RPM MOTOR-SIZE: 1" DIAMETER WITH SOLDER TERMINATIONS & 1/16" SHAFT-CURRENT REQUIREMENT: 340 milliamps @ 6 VOLTS DC
$4.75
MOTRED-1
1.5 to 6 VOLTS DC 500 to 2000 RPM MOTOR-SIZE: 1" DIAMETER WITH 50:1 GEAR REDUCTION UNIT (UNASSEMBLED)-SOLDER TERMINATIONS & 1/16" SHAFT-INCLUDES EASY TO FOLLOW INSTRUCTIONS-CURRENT REQUIREMENT: 200 milliamps @ 6.9 VOLTS DC
$17.50
21-130
1.5 to 3 VOLTS DC 1500 to 3000 RPM MOTOR-SIZE: 1" DIAMETER WITH CHOICE OF GEAR REDUCTION UNITS-YOUR CHOICE OF 1:60 or 1:288 GEAR RATIO (UNASSEMBLED) & 3mm x 52mm SHAFT-INCLUDES EASY TO FOLLOW INSTRUCTIONS
$17.50
MOT-10
3 to 9 VOLTS DC 5000 to 15000 RPM MOTOR-SIZE: 1-1/2" DIAMETER WITH 1/8" SHAFT AND WIRE LEAD TERMINATIONS -REASONABLY HIGH TORQUE CAPABILITY
$39.75
DCGM9654
1.5 to 12 VOLTS DC 200 to 800 RPM MOTOR-SIZE: 2-1/2" DIAMETER WITH WIRE LEAD TERMINATIONS & 1/4" SHAFT-REASONABLY HIGH TORQUE CAPABILITY
$32.50
GEARBX-2
1.5 to 6 VOLTS DC 500 to 2000 RPM MOTOR-SIZE: 1" DIAMETER WITH GEAR REDUCTION UNIT DOWN TO 1 to 3 RPM (ASSEMBLED)-SOLDER TERMINATIONS & 5/32" SHAFT-INCLUDES EASY TO FOLLOW INSTRUCTIONS
$48.75
`
GEARBX-1
3 to 6 VOLTS DC 4800 to 9600 RPM MOTOR-SIZE: 1" DIAMETER WITH GEAR REDUCTION UNIT (UNASSEMBLED) & BATTERY HOLDER WITH ON/OFF SWITCH-HOLDS 2 EACH AA BATTERIES-SOLDER TERMINATIONS & 1/16" SHAFT- EASY TO FOLLOW INSTRUCTIONS-ORDER #E91 FOR BATTERIES.
$17.75
59C43774
6 to 12 VOLTS DC 800 to 1600 RPM MOTOR-SIZE: 1-7/8" x 1-7/8"-WIRE TERMINATIONS & 1/8" ROUND SHAFT WITH PULLEY ATTACHED. COMES WITH A SQUARE MOTOR COVER & MOUNT THAT HAS 4ea HOLES THAT ARE SPACED 1-5/8" X 1-5/8". CURRENT DRAW IS 80ma @12VDC
$14.75
32203MD
6 to 12 VOLTS DC 3 to 5 RPM MOTOR-SIZE: 2-1/2" x 1-3/8"-SOLDER TERMINATIONS & 1/4" ROUND SHAFT
$29.75
*
DCM-462
3 to 12 VOLTS DC 400 to 20000 RPM MOTOR-SIZE: 1-1/2" (37mm) DIAMETER x 2-1/4" (57mm) LONG WITH SOLDER TERMINATIONS & 1/8" (3mm) SHAFT-CURRENT REQUIREMENT: 1.5 amps @ 12 VOLTS DC
$17.50
DCGM5020
6 to 27 VOLTS DC 55 to 250 RPM MOTOR-SIZE: 1-3/8" DIAMETER WITH WIRE LEADS & 1/4" KNURLED SHAFT
$24.75
DCGM5018
6 to 27 VOLTS DC 37 to 145 RPM MOTOR-SIZE: 1-3/8" DIAMETER WITH WIRE LEADS & 1/4" KNURLED SHAFT
$24.75
DCGM5012
6 to 27 VOLTS DC 15 to 100 RPM MOTOR-SIZE: 1-3/8" DIAMETER WITH WIRE LEADS & 1/4" KNURLED SHAFT
$29.50
DCM9451
6 to 24 VOLTS DC 850 to 1100 RPM MOTOR-SIZE: 2-1/4" DIAMETER WITH 1/4" FLAT SPADE TERMINALS FOR WIRE CONNECTIONS. COMES WITH A 1/4" SMOOTH STEEL SHAFT THAT STICKS OUT BOTH SIDES OF THE MOTOR HOUSING. ALSO WITH A GEAR ON ONE END OF THE SHAFT.
$49.75
*
MOTS2
12 VOLTS DC STEPPER MOTOR-7.5 DEGREES PER 48 STEPS ROTATION. CURRENT DRAW: 60ma DETENT TORQUE: 6.94ozf.in PULL IN TORQUE: 9.03ozf.in
$24.75
*
148-1-12-1
12 VOLTS DC 1 RPM TIMER MOTOR-SIZE: 1-7/8" (50mm) DIAMETER WITH SOLDER TERMINATIONS & 1/8" SHAFT-REQUIRES 30 milliamps (WITH NO LOAD) or 50 milliamps MAXIMUM-HANSON BRAND SERIES 148-1-125
$72.50
148-1-12-2
12 VOLTS DC 2 RPM TIMER MOTOR-SIZE: 1-7/8" (50mm) DIAMETER WITH SOLDER TERMINATIONS & 1/8" SHAFT-REQUIRES 30 milliamps (WITH NO LOAD) or 50 milliamps MAXIMUM-HANSON BRAND SERIES 148-1-125
$72.50
148-1-12-3
12 VOLTS DC 3 RPM TIMER MOTOR-SIZE: 1-7/8" (50mm) DIAMETER WITH SOLDER TERMINATIONS & 1/8" SHAFT-REQUIRES 30 milliamps (WITH NO LOAD) or 50 milliamps MAXIMUM-HANSON BRAND SERIES 148-1-125
$72.50
148-1-12-4
12 VOLTS DC 4 RPM TIMER MOTOR-SIZE: 1-7/8" (50mm) DIAMETER WITH SOLDER TERMINATIONS & 1/8" SHAFT-REQUIRES 30 milliamps (WITH NO LOAD) or 50 milliamps MAXIMUM-HANSON BRAND SERIES 148-1-125
$72.50
148-1-12-5
12 VOLTS DC 5 RPM TIMER MOTOR-SIZE: 1-7/8" (50mm) DIAMETER WITH SOLDER TERMINATIONS & 1/8" SHAFT-REQUIRES 30 milliamps (WITH NO LOAD) or 50 milliamps MAXIMUM-HANSON BRAND SERIES 148-1-125
